TACKLIFE Keypad Electronic Deadbolt Door Lock, Keyless Entry Door Lock

30-Day Money-Back Guarantee
Changed your mind? Ordered the wrong thing? Simply return your item for a prompt exchange or refund.
Free Shipping Over $70
Enjoy free shipping when you spend over $70
Secure Checkout
SSL Protected Checkout & Strongly Secure for Payments
Fast Handling
Every order is a priority to us. We handle your order quickly to ensure you get your product fast.

Ideal for front doors, side & back doors, garage entry doors, etc.

Power: DC6V, 4 AA (1.5v, LR6) alkaline batteries required.
Material: zinc alloy die casting
Surface: satin nickel
Suitable material: suitable for a wooden door thickness of 1-3/8" to 2" (35mm-51mm)
Latch: 2-3/8" to 2-3/4" (60mm-70mm) adjustable latch
Lock group: 5 beads, one-line CI lock group
Applicable ambient temperature: -20°C -70°C (without battery)
Applicable ambient humidity: 30%-90% (RH) (without battery)

Do not use an electric screwdriver during installation or over-tighten the screws.
The black hub of the latch must be in the lower position when fitting the latch into the latch hole.
Fit the alignment of the deadbolt latch and strike plate.
Install cylinder into the deadbolt keypad assembly with tailpiece in horizontal position inserted through the hub.
When installing the receiver assembly, the thumb turn piece is opposite to the latching side and ensures the deadbolt tailpiece is engaged with the turn piece.
Do the door handing identification process first after installation. Make sure the IC wire is connected firmly and the batteries are installed correctly and alive.

Before programming, do the door handing identification process first, the lock needs to learn if your door is a Right-Hand door or a Left-Hand door.
Your lock can only be programmed in the unlocked position, every programming step should be done in 6 seconds.
If you delete all user code the keypad will no longer open the lock, you must use the key to enter the lock.
If you disable all user codes the keypad and auto-locking will no longer open the lock, you must use the key to enter the lock.
After restoring default settings, you must run the operation door handing identification process again before programming any other function.

Shipping	This item ships to
Delivery	Estimated between and . Will usually ship within 1 business day.

Ideal for front doors, side & back doors, garage entry doors, etc.

Power: DC6V, 4 AA (1.5v, LR6) alkaline batteries required.
Material: zinc alloy die casting
Surface: satin nickel
Suitable material: suitable for a wooden door thickness of 1-3/8" to 2" (35mm-51mm)
Latch: 2-3/8" to 2-3/4" (60mm-70mm) adjustable latch
Lock group: 5 beads, one-line CI lock group
Applicable ambient temperature: -20°C -70°C (without battery)
Applicable ambient humidity: 30%-90% (RH) (without battery)

Do not use an electric screwdriver during installation or over-tighten the screws.
The black hub of the latch must be in the lower position when fitting the latch into the latch hole.
Fit the alignment of the deadbolt latch and strike plate.
Install cylinder into the deadbolt keypad assembly with tailpiece in horizontal position inserted through the hub.
When installing the receiver assembly, the thumb turn piece is opposite to the latching side and ensures the deadbolt tailpiece is engaged with the turn piece.
Do the door handing identification process first after installation. Make sure the IC wire is connected firmly and the batteries are installed correctly and alive.

Before programming, do the door handing identification process first, the lock needs to learn if your door is a Right-Hand door or a Left-Hand door.
Your lock can only be programmed in the unlocked position, every programming step should be done in 6 seconds.
If you delete all user code the keypad will no longer open the lock, you must use the key to enter the lock.
If you disable all user codes the keypad and auto-locking will no longer open the lock, you must use the key to enter the lock.
After restoring default settings, you must run the operation door handing identification process again before programming any other function.